General Rental, Inc

(740)282-9588 Equipment & Tool Rental
(740)765-4575 Event & Tool Rental

General Rental, Inc

Equipment & Tool Rental

1606 Sunset Blvd
Steubenville, Ohio 43952
Phone: 740-282-9588
Fax: 740-282-0331

Hours:
   Monday - Friday 7:30am - 5:00pm
   Saturday 7:00am - 12:00pm
   Sunday Closed
View Directions

Event & Party Rental

100 Kragel Road
Building B
Wintersville, Ohio 43953
Phone: 740-765-4575

Hours:
   Monday - Friday 7:30am - 5:00pm
   Saturday 7:00am - 12:00pm
   Sunday Closed
View Directions

Bull Float Handle - 6'

Six (6) foot extension Handle for a bull float. Essential for smoothing concrete.
Details

Bull Float - 48"

A Bull Float is a finishing tool that smooths fresh concrete surfaces. It has a long handle attached to a flat piece called a float. It is used after the cement has been tamped, and is considered a basic and essential concrete finishing tool.
Details

Mixer - Concrete - 2 CU/FT - Wheelbarrow - Electric

A Concrete Mixer is a device that combines cement, aggregate, and water to form concrete. Portable concrete mixers are often used so that the concrete can be made at the job site, giving the workers ample time to use the concrete before it hardens.
Details

Mixer - Concrete - 6 CU/FT - Towable

A Concrete Mixer is a device that combines cement, aggregate, and water to form concrete. Portable concrete mixers are often used so that the concrete can be made at the job site, giving the workers ample time to use the concrete before it hardens.
Details

Coring Rig - Diamond

A Core Drill is a drill specifically designed to remove a cylinder of material, much like a hole saw. Diamond-tipped core drills are commonly used in construction to create holes for pipes, utilities, and other large-diameter cuts in concrete or stone.
Details

Chipping (Breaker) Hammer - 35 LBS

Demolition, Chipping or Breaker Hammers are capable of tackling a variety of small-to-medium demolition jobs, from concrete floors to fireplace bricks. Just plug them in and go. This breaker is light enough to lift for walls and has tons of power!
Details

Jack Hammer - Electric

Electric Jack Hammers or "Breakers" are designed to tackle concrete, stones, bricks, frozen ground, and breaking asphalt. These units have the same characteristics as normal air breakers, minus the air compressors. Just plug them in and go.
Details

Mixer - Mortar - 6 CU/FT - Towable

Mortar mixers are similar to concrete mixers and are also designed to mix materials. The main difference is that they mix mortar and not aggregate (sand and gravel).
Details

Trowel - 36'' - Gas

A power trowel (also known as a "power float", "helicopter", "trowel machine" or "whirlybird") is a piece of light construction equipment used to apply a smooth finish to concrete slabs.
Details

Concrete - Vibrator

A concrete vibrator is a tool used on concrete pouring sites. A vibrator is used to ensure that a pour is even and free of air bubbles so that the concrete will remain strong and have a smooth finish. This tool is essential on large load bearing projects.
Details

Power Buggy - 9 CU/FT - 36" Wide

A Power Buggy is a motorized wheelbarrow that can easily move concrete, mud, gravel and dirt over tough job sites.
Details

Groover - Concrete

Concrete grooving tools include tools that create grooves through wet, freshly poured concrete and machines that score grooves through tough, cured concrete. This tool is for use on wet concrete.
Details

Trowel - 12" - Hand

A Hand Trowel refers to a flat bladed masonry tool which is used to smooth concrete and mortar surfaces.
Details

Grinder - Concrete

A Concrete Floor Grinder is a tool that uses horizontally mounted discs that rotate. The machine itself is roughly the size of a vacuum cleaner. Concrete floor grinders are used to level, clean or smooth a concrete floor or surface.
Details

Core Drill - Hand Held

A core drill is specifically designed to remove a cylinder of material, like a hole saw. Core drills are used where the core needs to be preserved or where drilling can be done more rapidly since less material needs to be removed than with a standard bit.
Details

Concrete - Bits & Blades

To select blades or bits for cutting concrete, you need to know how they will be used, the type of material you have to cut and the machine you plan to cut with. Provided with this information our specialists can recommend the right tool for the job.
Details

Saw - Block & Brick - 14" Dry - Electric 110V

A Block & Brick Electric Saw is a portable, frame-mounted, compact, dry-cutting masonry saw capable of cutting a wide range of brick and block. This saw is to concrete, what a chain saw is to tree logs and timber.
Details

Saw - Block & Brick - 14" Wet - Gas

The Husqvarna Portasaw MS 355 G is a portable, frame-mounted, compact, wet-cutting masonry saw. The most reliable saw on the market is easy to set-up and transport. The removable handles make it easy to carry and easy to store.
Details
Would you like
Equipment & Tool Rental Catalog
or
Event & Party Rental Catalog
Equipment & Tool Rental
740-282-9588
Event & Party Rental
740-765-4575